Dell Force10 S4810P Reference Manual page 1187

Usage The following describes the show ip ospf process-id database network
Information command shown in the Example below.
Field
LS Age
Options
LS Type
Link State ID
Advertising Router
Checksum
Length
Network Mask
Attached Router
Example
FTOS#show ip ospf 1 data network
LS age: 1372
Options: (No TOS-capability, DC, E)
LS type: Network
Link State ID: 202.10.10.2
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000006
Checksum: 0xa35
Length: 36
Network Mask: /24
LS age: 252
Options: (TOS-capability, No DC, E)
LS type: Network
Link State ID: 192.10.10.2
Advertising Router: 192.10.10.2
LS Seq Number: 0x80000007
Checksum: 0x4309
Length: 36
Network Mask: /24
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The following
options can be found in this item:
•
•
•
Displays the LSA's type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Identifies the link state sequence number. This number enables you
to identify old or duplicate LSAs.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the length in bytes of the LSA.
Identifies the IP address of routers attached to the network.
OSPF Router with ID (20.20.20.5) (Process ID 1)
Network (Area 0.0.0.0)
Attached Router: 20.20.20.8
Attached Router: 20.20.20.9
Attached Router: 20.20.20.7
Network (Area 0.0.0.1)
TOS-capability or No TOS-capability is displayed depending
on whether the router can support Type of Service.
DC or No DC is displayed depending on whether the
originating router can support OSPF over demand circuits.
E or No E is displayed on whether the originating router can
accept AS External LSAs.
1187