Bandwidth-Percentage; Bandwidth-Weight - Dell Force10 S4810P Reference Manual

bandwidth-percentage

Assign a percentage of weight to the class/queue.
E-Series, Z-Series, S4810
Syntax bandwidth-percentage percentage
To remove the bandwidth percentage, use the no bandwidth-percentage command.
Parameters
percentage
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 6.2.1.1
Usage
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and disables
Information
the scheduling of that class. If the sum of the bandwidth percentages given to all eight classes
exceeds 100%, the bandwidth percentage automatically scales down to 100%.
Related qos-policy-output
Commands

bandwidth-weight

Assign a priority weight to a queue.
C-Series, S-Series
Syntax bandwidth-weight weight
To remove the bandwidth weight, use the no bandwidth-weight command.
Parameters
weight
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
Version 7.7.1.0
Version 7.6.1.0
Usage
This command provides a minimum bandwidth guarantee to traffic flows in a particular queue.
Information
The minimum bandwidth is provided by scheduling packets from that queue a certain number
1312
Enter the percentage assignment of weight to the class/queue. The
range is 0 to 100% (granularity 1%).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
– creates a QoS output policy.
Enter the weight assignment to queue. The range is 1 to 1024 (in
increments of powers of 2: 2, 4, 8, 16, 32, 64, 128, 256, 512, or 1024).
Introduced on the S-Series.
Introduced on the C-Series.