Protocol-Tunnel Destination-Mac; Protocol-Tunnel Enable - Dell Force10 S4810P Reference Manual

protocol-tunnel destination-mac

Overwrite the BPDU destination MAC address with a specific value.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax protocol-tunnel destination-mac xstp address
Parameters
stp
Defaults The default destination MAC is 01:01:e8:00:00:00.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0
Usage When you enable VLAN-Stacking, no protocol packets are tunneled.
Information
Related show protocol-tunnel
Command

protocol-tunnel enable

Enable protocol tunneling globally on the system.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax protocol-tunnel enable
To disable protocol tunneling, use the no protocol-tunnel enable command.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.4.1.0
Usage FTOS must have the default CAM profile with the default microcode before you enable L2PT.
Information
1464
Change the default destination MAC address used for L2PT to another
value.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series, and S-Series.
Introduced
– displays tunneling information for all VLANs.
Introduced on the Z9000.
Introduced on the S4810.
Introduced