Dell Force10 S4810P Reference Manual page 1147

dead-interval
seconds
hello-interval
seconds
retransmit-
interval
transmit-delay
seconds
Defaults
Command Modes ROUTER OSPF
Command History
Version 8.3.12.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage
All OSPF areas must be connected to a backbone area (usually Area 0). Virtual links connect
Information
broken or discontiguous areas.
You cannot enable both authentication options. Choose either the authentication-key
or message-digest-key option.
Related
router ospf
Commands
(OPTIONAL) Enter the keywords dead-interval followed by a
number as the number of seconds for the interval. The range is 1 to
8192. The default is 40 seconds.
(OPTIONAL) Enter the keywords hello-interval followed by the
number of seconds for the interval. The range is 1 to 8192. The default
is 10 seconds.
(OPTIONAL) Enter the keywords retransmit-interval
seconds
followed by the number of seconds for the interval. The range is 1 to
8192. The default is 5 seconds.
(OPTIONAL) Enter the keywords transmit-delay followed by the
number of seconds for the interval. The range is 1 to 8192. The default
is 1 second.
• dead-interval seconds = 40 seconds
• hello-interval seconds = 10 seconds
• retransmit-interval seconds = 5 seconds
• transmit-delay seconds = 1 second
Deprecated command on the S4810.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– enters ROUTER OSPF mode to configure an OSPF instance.
the keyword md5 followed by the key. The key is an
alphanumeric string up to 16 characters long. Optionally, for
the encryption-type variable, enter the number seven
before entering the key string to indicate that an encrypted
password will follow.
1147