Dell Force10 S4810P Reference Manual page 1203

Error Type
Auth-Error
MD5-Error
Cksum-Err
Version
AreaMismatch
Conf-Issue
No-Buffer
Seq-no
Socket
Q-overflow
Unknown-Pkt
Example
FTOS#show ip ospf 1 statistics global
OSPF Packet Count
RX 10
TX 10
OSPF Global Queue Length
Hello-Q
LSR-Q
Other-Q
Error packets (Only for RX)
Intf-Down
Wrong-Len
Auth-Err
Version
No-Buffer
Q-OverFlow 0
Error packets (Only for TX)
Socket Errors
FTOS#
Usage The show ip ospf process-id statistics command displays the error packet
Information count received on each interface as:
Description
Simple authentication error.
MD5 error
Checksum Error
Version mismatch
Area mismatch
The received hello packet has a different hello or dead interval than
the configuration.
Buffer allocation failure.
A sequence no errors occurred during the database exchange
process.
Socket Read/Write operation error.
Packet(s) dropped due to queue overflow.
Received packet is not an OSPF packet.
Total Error Hello DDiscr LSReq LSUpd LSAck
0 8
0 10
TxQ-Len RxQ-Len Tx-Mark Rx-Mark
0 0
0 0
0 0
0 Non-Dr
0 Invld-Nbr
0 MD5-Err
0 AreaMis
0 Seq-No
Unkown-Pkt 0
0
• The hello-timer remaining value for each interface
• The wait-timer remaining value for each interface
• The grace-timer remaining value for each interface
• The packet count received and transmitted for each neighbor
• Dead timer remaining value for each neighbor
2 0 0
0 0 0
0 2
0 0
0 0
0 Self-Org 0
0 Nbr-State 0
0 Chksum 0
0 Conf-Issues 0
0 Socket 0
0
0
1203