Track - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)
Hide thumbs Also See for Force10 S4810P:
Table of Contents

Advertisement

Item
Virtual MAC address
Virtual IP address
Authentication:...
Tracking states..
Example
FTOS>show vrrp
------------------
GigabitEthernet 12/3, VRID: 1, Net: 10.1.1.253
State: Master, Priority: 105, Master: 10.1.1.253 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0
Virtual MAC address:
Virtual IP address:
Authentication: (none)
Tracking states for 1 interfaces:
------------------
GigabitEthernet 12/4, VRID: 2, Net: 10.1.2.253
State: Master, Priority: 110, Master: 10.1.2.253 (local)
Hold Down: 10 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0
Virtual MAC address:
Virtual IP address:
Authentication: (none)
Tracking states for 2 interfaces:
FTOS>

track

Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled.
C-Series, E-Series, S-Series (S50)
Syntax
track interface [priority-cost cost]
To disable monitoring, use the no track interface command.
1622
Description
Displays the virtual MAC address of the VRRP group.
Displays the virtual IP address of the VRRP router to which the
interface is connected.
States whether authentication is configured for the VRRP group. If it
is, the authentication type and the password are listed.
This line is displayed if the track command is configured on an
interface. Below this line, the following information on the tracked
interface is displayed:
00:00:5e:00:01:01
10.1.1.252
Up GigabitEthernet 12/17 priority-cost 10
00:00:5e:00:01:02
10.1.2.252
Up GigabitEthernet 2/1 priority-cost 10
Up GigabitEthernet 12/17 priority-cost 10
Gratuitous ARP sent displays the number of gratuitous ARPs
sent.
Dn or Up states whether the interface is down or up.
the interface type slot/port information.

Advertisement

Table of Contents
loading

Table of Contents