Vrrp Delay Reload - Dell Force10 S4810P Reference Manual

Version 8.3.8.0
Usage
This command applies to a single interface. When used in conjunction with the vrrp delay
Information
reload CLI, the later timer rules the VRRP enabling. For example, if vrrp delay reload
is 600 and the vrrp delay minimum is 300:
Related

vrrp delay reload

Command
vrrp delay reload
Set the delay time for VRRP initialization after a system reboot.
Z-Series, S4810
Syntax vrrp delay reload seconds
Parameters
seconds
Defaults 0
Command Modes INTERFACE
Command History
Version 9.0.0.0
Version 8.3.8.0
Usage
This command applies to all the VRRP configured interfaces on a system. When used in
Information
conjunction with the vrrp delay minimum CLI, the later timer rules the VRRP enabling.
For example, if vrrp delay reload is 600 and the vrrp delay minimum is 300:
You must save the configuration and reload the system for the delay timers to take effect.
Related vrrp delay minimum
Command
Introduced on the S4810.
• When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all
interfaces that are up and configured for VRRP.
• When an interface comes up, whether as part of a system reload or an interface
reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that interface.
– sets the delay time for VRRP initialization after a system reboot.
Enter the number of seconds for the delay. The range is 0 to 900 (0
indicates no delay).
Introduced on the Z9000.
Introduced on the S4810.
• When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all
interfaces that are up and configured for VRRP.
• When an interface comes up, whether as part of a system reload or an interface
reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that interface.
– sets the delay time for VRRP initialization after a line card reboot.
1625