Command Modes
Command History
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
show ipv6 fib stack-unit
View all FIB entries.
S-Series, Z-Series, S4810
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
slot-number
summary
ipv6-address
Command Modes
Command History
Version 9.0.0.0
Version 8.3.7.0
Version 8.4.2.1
Usage
Host tables are not stored in CAM tables on S-Series platforms. Entries for camIndex
Information
displays as zero (0) on the show ipv6 fib stack-unit output for neighbor entries,
such as address resolution protocol (ARP) entries.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
•
EXEC
•
EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series TeraScale.
Enter the number of the stack unit. The range is 0 to 11.
(OPTIONAL) Enter the keyword summary to view a summary of
entries in IPv6 cam.
Enter the IPv6 address in the x:x:x:x::x/n format to display networks
that have more specific prefixes. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
•
EXEC
•
EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
949