Dell Force10 S4810P Reference Manual page 1583

Parameters
group-id
detail
Defaults none
Command Modes
Command History
Version 8.3.12.0
Version 8.4.2.3
Example
FTOS# show uplink-state-group
Uplink State Group: 1 Status: Enabled, Up
Uplink State Group: 3 Status: Enabled, Up
Uplink State Group: 5 Status: Enabled, Down
Uplink State Group: 6 Status: Enabled, Up
Uplink State Group: 7 Status: Enabled, Up
Uplink State Group: 16 Status: Disabled, Up
FTOS# show uplink-state-group 16
Uplink State Group: 16 Status: Disabled, Up
FTOS#show uplink-state-group detail
(Up): Interface up (Dwn): Interface down (Dis): Interface
disabled
Uplink State Group
Upstream Interfaces
Downstream Interfaces :
Uplink State Group
Upstream Interfaces
Downstream Interfaces : Te 13/0(Up) Te 13/1(Up) Te 13/3(Up) Te
13/5(Up) Te 13/6(Up)
Uplink State Group
Upstream Interfaces
Downstream Interfaces : Te 13/2(Dis) Te 13/4(Dis) Te
13/11(Dis) Te 13/12(Dis) Te 13/13(Dis) Te 13/14(Dis) Te
13/15(Dis)
Uplink State Group
Upstream Interfaces
Downstream Interfaces :
Uplink State Group
Upstream Interfaces
Downstream Interfaces :
Uplink State Group
Upstream Interfaces
Downstream Interfaces : Gi 0/40(Dwn)
Displays status information on a specified uplink-state group or all
groups. The valid group-id values are 1 to 16.
Displays additional status information on the upstream and
downstream interfaces in each group
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced on the S-Series S50.
: 1 Status: Enabled, Up
:
: 3 Status: Enabled, Up
: Gi 0/46(Up) Gi 0/47(Up)
: 5 Status: Enabled, Down
: Gi 0/0(Dwn) Gi 0/3(Dwn) Gi 0/5(Dwn)
: 6 Status: Enabled, Up
:
: 7 Status: Enabled, Up
:
: 16 Status: Disabled, Up
: Gi 0/41(Dwn) Po 8(Dwn)
1583