Authentication-Type; Clear Counters Vrrp - Dell Force10 S4810P Reference Manual

authentication-type

Enable authentication of VRRP data exchanges.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax authentication-type simple [encryption-type] password
To delete an authentication type and password, use the no authentication-type
command.
Parameters
simple
encryption-type
password
Defaults Not configured.
Command Modes VRRP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage The given password is encrypted by the system and the show config displays an encrypted
Information
text string for any of the encrypted typed used.

clear counters vrrp

Clear the counters maintained on VRRP operations.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear counters vrrp [vrrp-id]
Parameters
vrrp-id
1614
Enter the keyword simple to specify simple authentication.
(OPTIONAL) Enter one of the following numbers:
• 0 (zero) specifies an un-encrypted authentication data will
follow.
• 7 (seven) specifies a hidden authentication data will follow.
• LINE is the un-encrypted (cleartext) authentication data.
Enter a character string up to eight characters long as a password. If
you do not enter an encryption-type, the password is stored as clear
text.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter the number of the VRRP group ID. The range is 1 to
255.