Dell Force10 S4810P Reference Manual page 905

Parameters
source address
mask
any
host
destination
address
message-type
count
byte
log
monitor
Defaults Not configured.
Command Modes ACCESS-LIST
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Usage
The C-Series cannot count both packets and bytes, so when you enter the count byte
Information
options, only bytes are incremented.
• Use the no deny icmp {source address mask | any | host ipv6-
address} {destination address | any | host ipv6-address}
command
Enter the IPv6 address of the network or host from which the packets
were sent in the x:x:x:x::x format followed by the prefix length in the /x
format. The range is /0 to /128. The :: notation specifies successive
hexadecimal fields of zero.
Enter a network mask in /prefix format (/x).
Enter the keyword any to specify that all routes are subject to the
filter.
ipv6-address
Enter the keyword host followed by the IPv6 address of the host in
the x:x:x:x::x format. The :: notation specifies successive hexadecimal
fields of zero.
Enter the IPv6 address of the network or host to which the packets
are sent in the x:x:x:x::x format followed by the prefix length in the /x
format. The range is /0 to /128. The :: notation specifies successive
hexadecimal fields of zero.
On the E-Series only, enter an ICMP message type, either with the
type (and code, if necessary) numbers or with the name of the
message type. The range is 0 to 255 for ICMP type and 0 to 255 for
ICMP code.
(OPTIONAL) Enter the keyword count to count packets processed
by the filter.
(OPTIONAL) Enter the keyword byte to count bytes processed by
the filter.
(OPTIONAL) Enter the keyword log to have the information kept in an
ACL log file.
(OPTIONAL) Enter the keyword monitor to monitor traffic on the
monitoring interface specified in the flow-based monitoring session
along with the filter operation.
Introduced on the S-Series.
Introduced on the E-Series TeraScale.
Introduced on the C-Series.
Introduced on the E-Series TeraScale Added the monitor option.
905