Clock Summer-Time Date - Dell Force10 S4810P Reference Manual

clock summer-time date

Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clock summer-time time-zone date start-month start-day start-
year start-time end-month end-day end-year end-time [offset]
To delete a daylight saving time zone configuration, use the no clock summer-time
command.
Parameters
time-zone
start-month
start-day
start-year
start-time
end-day
end-month
end-time
end-year
offset
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
1556
Enter the three-letter name for the time zone. This name is displayed
in the show clock output.
Enter the name of one of the 12 months in English. You can enter the
name of a day to change the order of the display to time day month
year.
Enter the number of the day. The range is 1 to 31. You can enter the
name of a month to change the order of the display to time day month
year.
Enter a four-digit number as the year. The range is 1993 to 2035.
Enter the time in hours:minutes. For the hour variable, use the 24-hour
format; example, 17:15 is 5:15 pm.
Enter the number of the day. The range is 1 to 31. You can enter the
name of a month to change the order of the display to time day month
year.
Enter the name of one of the 12 months in English. You can enter the
name of a day to change the order of the display to time day month
year.
Enter the time in hours:minutes. For the hour variable, use the 24-hour
format; example, 17:15 is 5:15 pm.
Enter a four-digit number as the year. The range is 1993 to 2035.
(OPTIONAL) Enter the number of minutes to add during the summer-
time period. The range is 1 to1440. The default is 60 minutes.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.