Show Run Iscsi - Dell Force10 S4810P Reference Manual
Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)
Hide thumbs
Also See for Force10 S4810P:
- Manual (60 pages) ,
- Quick start manual (27 pages) ,
- Configuration manual (1144 pages)
Table of Contents
Advertisement
Example
FTOS# show isci session detailed
Session 0 :
---------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.44 33345
Session 1 :
----------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.53 33432
Related
Commands
show run iscsi
Display all globally configured non-default iSCSI settings in the current FTOS session.
S4810
Syntax
show run iscsi
Command Modes
EXEC Privilege
Command History
Version 8.3.12.0
Version 8.3.16.0
Related
Commands
Initiator Target
Initiator Target
•
show iscsi
– displays the currently configured iSCSI settings.
•
show iscsi session
– displays information about active iSCSI sessions on the switch.
•
show run iscsi
– shows run iscsi.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
•
show iscsi
– displays the currently configured iSCSI settings.
•
show iscsi session
– displays detailed information about active iSCSI sessions on the
switch.
•
show iscsi session detailed
the switch.
Target
IP Address
TCPPort ID
10.10.0.101 3260
Target
IP Address TCPPort ID
10.10.0.101 3260
– displays detailed information on active iSCSI sessions on
Connection
0
Connection
0
965
Advertisement
Table of Contents
