Dell Force10 S4810P Reference Manual page 799

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage The following describes the show interfaces description command shown in the
Information
Example below.
Field
Interface
OK?
Status
Protocol
Description
Example
FTOS>
Interface
GigabitEthernet 4/17 NO
host***
GigabitEthernet 4/18 NO
GigabitEthernet 4/19 NO
marketing***
GigabitEthernet 4/20 NO
Bill***
GigabitEthernet 4/21 NO up down ***connected-to-Radius-
Server***
GigabitEthernet 4/22 NO
Server***
GigabitEthernet 4/23 NO
client***
TenGigabitEthernet 6/0 NO admin down down
GigabitEthernet 8/0 YES
GigabitEthernet 8/1 YES
GigabitEthernet 8/2 YES
GigabitEthernet 8/3 YES
GigabitEthernet 8/4 YES
GigabitEthernet 8/5 YES
GigabitEthernet 8/6 YES
GigabitEthernet 8/7 YES
GigabitEthernet 8/8 YES
GigabitEthernet 8/9 YES
GigabitEthernet 8/10 YES up
GigabitEthernet 8/11 YES up
FTOS>
Related
show interfaces
Commands
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the type of interface and associated slot and port number.
Indicates if the hardware is functioning properly.
States whether the interface is enabled (up) or disabled
(administratively down).
States whether IP is enabled (up) or disabled (down) on the
interface.
Displays the description (if any) manually configured for the
interface.
OK? Status
admin down down ***connected-to-
admin down down ***connected-to-Tom***
admin down down ***connected-to-
admin down down ***connected-to-
admin down down ***connected-to-Web-
admin down down ***connected-to-PC-
up
up
up
up
up
up
up
up
up
up
– displays information on a specific physical interface or virtual interface.
Protocol Description
up
up
up
up
up
up
up
up
up
up
up
up
799