Show Running-Config Uplink-State-Group; Show Uplink-State-Group - Dell Force10 S4810P Reference Manual

show running-config uplink-state-group

Display the current configuration of one or more uplink-state groups.
S-Series (S50 only), S4810
Syntax show running-config uplink-state-group [group-id]
Parameters
group-id
Defaults none
Command Modes
Command History
Version 8.3.12.0
Version 8.4.2.3
Example
FTOS#show running-config uplink-state-group
!
no enable
uplink state track 1
downstream GigabitEthernet 0/2,4,6,11-19
upstream TengigabitEthernet 0/48, 52
upstream PortChannel 1
!
uplink state track 2
downstream GigabitEthernet 0/1,3,5,7-10
upstream TengigabitEthernet 0/56,60
Related
Commands

show uplink-state-group

Display status information on a specified uplink-state group or all groups.
S-Series (S50 only), S4810
Syntax show uplink-state-group [group-id] [detail]
1582
Displays the current configuration of all uplink-state groups or a
specified group. The valid group-id values are 1 to 16.
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced on the S-Series S50.
• show uplink-state-group
group or all groups.
• uplink-state-group – creates an uplink-state group and enables the tracking of
upstream links.
– displays the status information on a specified uplink-state