Dell Force10 S4810P Reference Manual page 1629

brief
Command Modes
Command History
Version 8.3.10.0
Version 8.3.2.0
Usage The following describes the show vrrp ipv6 command shown in the Example below.
Information
Line Beginning with
GigabitEthernet...
VRF
State: master...
Hold Down:...
Adv rcvd:...
Virtual MAC address
Virtual IP address
Tracking states...
(OPTIONAL) Enter the keyword brief to view a table of information
on the VRRP groups on the E-Series.
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced on the E-Series TeraScale.
Description
Displays the Interface, the VRRP group ID, and the network address.
If the interface is no sending VRRP packets, 0.0.0.0 appears as the
network address.
VRF instance to which the interface (on which the VRRP group is
configured) belongs.
Displays the interface's state:
•
•
•
the interface's priority and the IP address of the MASTER.
This line displays additional VRRP configuration information:
•
•
•
This line displays counters for the following:
•
•
•
Displays the virtual MAC address of the VRRP group.
Displays the virtual IP address of the VRRP router to which the
interface is connected.
Displays information on the tracked interfaces or objects configured
for a VRRP group (track command), including:
Na/If (not available).
master (MASTER virtual router).
backup (BACKUP virtual router).
Hold Down displays the hold down timer interval in seconds.
Preempt displays TRUE if preempt is configured and FALSE if
preempt is not configured.
AdvInt displays the Advertise Interval in seconds.
Adv rcvd displays the number of VRRP advertisements
received on the interface.
Adv sent displays the number of VRRP advertisements sent
on the interface.
Bad pkts rcvd displays the number of invalid packets
received on the interface.
1629