Dell Force10 S4810P Reference Manual page 1423

Parameters
name
access-class
access-list-name
nopassword
password
secret
encryption-type
password
privilege
secret
Defaults The default encryption type for the password option is 0. The default encryption type for the
secret option is 0.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage To view the defined user names, use the show running-config user command.
Information
Enter a text string for the name of the user up to 63 characters.
Enter the keywords access-class followed by the name of a
configured access control list (either a IP access control list or MAC
access control list).
Enter the keyword nopassword to specify that the user should not
enter a password.
Enter the keyword password followed by the encryption-type
or the password.
Enter the keyword secret followed by the encryption-type or
the password.
Enter an encryption type for the password that you will enter.
• 0 directs FTOS to store the password as clear text. It is the
default encryption type when using the password option.
• 7 to indicate that a password encrypted using a DES hashing
algorithm will follow. This encryption type is available with
the password option only.
• 5 to indicate that a password encrypted using an MD5
hashing algorithm will follow. This encryption type is
available with the secret option only, and is the default
encryption type for this option.
Enter a string up to 32 characters long.
level
Enter the keyword privilege followed by a number from zero (0)
to 15.
Enter the keyword secret followed by the encryption type.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the secret option and the MD5 password
encryption. Extended the name from 25 to 63 characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1423