Dell Force10 S4810P Reference Manual page 825

Field
Port-Channel 1...
Hardware is...
Port-channel is
part...
Internet address...
MTU 1554...
LineSpeed
Members in this...
ARP type:...
Last clearing...
Queueing strategy.
packets input...
Input 0 IP packets...
0 64-byte...
Received 0...
Output 0...
Rate information...
Time since...
Example
FTOS#show interfaces port-channel 20
Port-channel 20 is up, line protocol is up (Failover-group 1
is down)
Hardware address is 00:01:e8:01:46:fa
Port-channel is part of failover-group 1
Internet address is 1.1.120.1/24
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 2000 Mbit
Members in this channel: Gi 0/5 Gi 0/18
ARP type: ARPA, ARP timeout 04:00:00
Last clearing of "show interfaces" counters 00:00:00
Description
Displays the LAG's status. In the Example, the status of the LAG's
LAG fate-sharing group ("Failover-group") is listed.
Displays the interface's hardware information and its assigned MAC
address.
Indicates whether the LAG is part of a LAG fate-sharing group
("Failover-group").
States whether an IP address is assigned to the interface. If an IP
address is assigned, that address is displayed.
Displays link and IP MTU.
Displays the interface's line speed. For a port channel interface, it is
the line speed of the interfaces in the port channel.
Displays the interfaces belonging to this port channel.
Displays the ARP type and the ARP timeout value for the interface.
Displays the time when the show interfaces counters were
cleared.
States the packet queuing strategy. FIFO means first in first out.
Displays the number of packets and bytes into the interface.
Displays the number of packets with IP headers, VLAN tagged
headers, and MPLS headers. The number of packets may not add
correctly because a VLAN tagged IP packet counts as both a VLAN
packet and an IP packet.
Displays the size of packets and the number of those packets
entering that interface. This information is displayed over two lines.
Displays the type and number of errors or other specific packets
received. This information is displayed over three lines.
Displays the type and number of packets sent out the interface. This
information is displayed over three lines.
Displays the traffic rate information into and out of the interface.
Traffic rate is displayed in bits and packets per second.
Displays the time since the last change in the configuration of this
interface.
825