Fefd-Global Interval; Fefd-Global - Dell Force10 S4810P Reference Manual

Defaults Not configured.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.12.0
Legacy E-Series
command.
Related
Commands

fefd-global interval

Configure an interval between FEFD control packets.
E-Series, S4810
Syntax fefd-global interval seconds
To return to the default value, use the no fefd-global interval command.
Parameters
seconds
Defaults 15 seconds
Command Modes CONFIGURATION
Command History
Version 8.3.12.0
Legacy E-Series
command.
Related
Commands

fefd-global

Enable FEFD globally on the system.
E-Series, Z-Series, S4810
Syntax fefd-global [mode {normal | aggressive}]
•
•
Introduced on the Z9000.
Introduced on the S4810.
• fefd – enables far-end failure detection.
Enter a number as the time between FEFD control packets. The range
is 3 to 300 seconds. The default is 15 seconds.
Introduced on the S4810.
• fefd – enables far-end failure detection.
• fefd-global – enables FEFD globally on the system.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/ port information.
1063