Name - Dell Force10 S4810P Reference Manual

bridge-priority
priority
Defaults default bridge-priority is 32768.
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Usage By default, all VLANs are mapped to MST instance zero (0) unless you use the vlan range
Information command to map it to a non-zero instance.

name

The name you assign to the multiple spanning tree region.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax name region-name
To remove the region name, use the no name command.
Parameters
region-name
Defaults no default name.
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Usage For two MSTP switches to be within the same MSTP region, the switches must share the same
Information region name (including matching case).
1106
Enter the keywords bridge-priority followed by a value in
increments of 4096 as the bridge priority. The range is zero (0) to
61440.
Valid priority values are: 0, 4096, 8192, 12288, 16384, 20480, 24576,
28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, and 61440. All
other values are rejected.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
Enter the MST region name. The range is 32 character limit.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.