ip ospf auth-change-wait-time
OSPF provides a grace period while OSPF changes its interface authentication type. During the grace period, OSPF
sends out packets with new and old authentication scheme untill the grace period expires.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip ospf auth-change-wait-time seconds
To return to the default, use the no ip ospf auth-change-wait-time command.
Parameters
seconds
Defaults
zero (0) seconds.
Command Modes
INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
ip ospf authentication-key
Enable authentication and set an authentication key on OSPF traffic on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip ospf authentication-key [encryption-type] key
To delete an authentication key, use the no ip ospf authentication-key command.
Parameters
encryption-type
key
Defaults
Not configured.
Command Modes
INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
1162
Enter the seconds. The range is 0 to 300.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter 7 to encrypt the key.
Enter an eight-character string. Strings longer than eight characters
are truncated.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.