Mac Learning-Limit Learn-Limit-Violation; Mac Learning-Limit Mac-Address-Sticky - Dell Force10 S4810P Reference Manual

clear mac-address-table dynamic
dynamically.

mac learning-limit mac-address-sticky

parameter.
show mac learning-limit

mac learning-limit learn-limit-violation

Configure an action for a MAC address learning-limit violation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown} command.
Parameters
log
shutdown
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.8.1.0
Version 7.5.1.0
Usage This is supported on physical interfaces, static LAGs, and LACP LAGs.
Information
Related show mac learning-limit
Commands
mac learning-limit mac-address-sticky
Maintain the dynamically-learnt mac addresses as sticky MAC addresses on the selected port.
Z-Series, S4810
Syntax mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac
learning-limit command.
– clears the MAC address table of all MAC address learned
– Replaces deprecated no-station-move
– displays MAC learning-limit configuration.
Enter the keyword log to generate a syslog message on a learning-
limit violation.
Enter the keyword shutdown to shut down the port on a learning-
limit violation.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– displays details of the mac learning-limit.
1035