Distribute-List Out - Dell Force10 S4810P Reference Manual

distribute-list out

Apply a filter to restrict certain routes destined for the local routing table after the SPF calculation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax distribute-list prefix-list-name out [bgp | connected | isis |
rip | static]
To remove a filter, use the no distribute-list prefix-list-name out [bgp
| connected | isis | rip | static] command.
Parameters
prefix-list-name
bgp
connected
isis
rip
static
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Enter the name of a configured prefix list.
(OPTIONAL) Enter the keyword bgp to specify that BGP routes are
distributed.
NOTE: BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
(OPTIONAL) Enter the keyword connected to specify that
connected routes are distributed.
(OPTIONAL) Enter the keyword isis to specify that IS-IS routes are
distributed.
NOTE: BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
(OPTIONAL) Enter the keyword rip to specify that RIP routes are
distributed.
NOTE: BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
(OPTIONAL) Enter the keyword static to specify that only manually
configured routes are distributed.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1157