Dell Force10 S4810P Reference Manual page 1281

Parameters
interface
interface
Defaults none
Command Modes
Command History
Version 7.8.1.0
Usage This command has two types of display — a list of all PVLAN interfaces or for a specific
Information interface. Examples of both types of output are shown below.
The following describes the show interfaces private-vlan command shown in the
Examples below.
Field
Interface
Vlan
PVLAN-Type
Interface Type
Status
Example (All)
FTOS# show interfaces private-vlan
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Gi 2/1
Gi 2/2
Gi 2/3
Gi 2/4
Example
FTOS# show interfaces private-vlan Gi 2/2
(Specific) Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Gi 2/2
Related
private-vlan mode
Commands
show vlan private-vlan
show vlan private-vlan mapping
switchport mode private-vlan
(OPTIONAL) Enter the keyword interface followed by the ID of the
specific interface for which to display PVLAN status.
• EXEC
• EXEC Privilege
Introduced on the C-Series and S-Series.
Description
Displays the type of interface and associated slot and port number.
Displays the VLAN ID of the designated interface.
Displays the type of VLAN in which the designated interface resides.
Displays the PVLAN port type of the designated interface.
States whether the interface is operationally up or down.
10 Primary
100 Isolated
10 Primary
101 Community
100 Isolated
– sets the mode of the selected VLAN to community, isolated, or primary.
– displays the PVLANs and/or interfaces that are part of a PVLAN.
– sets PVLAN mode of the selected port.
Promiscuous
Host
Trunk
Host
Host
– displays the primary-secondary VLAN mapping.
Up
Down
Up
Up
Up
1281