Show Hardware System-Flow - Dell Force10 S4810P Reference Manual

----- Buffer Details for Stack-Unit 0 -----
Total Buffers allocated per Stack-Unit 46080
Example (Buffer-
FTOS(conf)#sh hardware stack-unit 0 buffer unit 0 port 1
Info)
buffer-info
----- Buffer Stats for Unit 0 Port 1 -----
Maximum Shared Limit for the Port: 30720
Default Packet Buffer allocate for the Port: 120
Used Packet Buffer for the Port: 0
Example
FTOS(conf)#sh hardware stack-unit 0 buffer unit 0 port 1 queue
(Queue2/Buffer-
2 buffer-info
Info)
----- Buffer Stats for Unit 0 Port 1 Queue 2 -----
Maximum Shared Limit: 30720
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
Related
clear hardware system-flow
Commands
show interfaces stack-unit
member.
show processes cpu (S-Series)
running in an S-Series.
show system (S-Series and Z-Series)
a specific member.

show hardware system-flow

Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S-Series, Z-Series
Syntax show hardware system-flow layer2 stack-unit id port-set 0-3
[counters]
Parameters
acl | qos
stack-unit
port-set
[counters]
Defaults none
Command Modes EXEC Privilege
650
– clears the statistics from selected hardware components.
– displays information on all interfaces on a specific S-Series stack
– displays the CPU usage information based on the processes
For the selected stack member and stack member port-pipe, display
which system flow entry the packet hits and what queue the packet
takes as it dumps the raw system flow tables.
id
Enter the keywords stack-unit to select a stack member ID. The
unit ID range for Z9000 is 0.
0-3
Enter the keywords port-set with a port-pipe number, 0 or 3.
NOTE: The S25 models of the S-Series have only port-pipe 0.
(OPTIONAL) Enter the keyword counters to display hit counters for
the selected ACL or QoS option.
– displays the current status of all the stack members or