Monitor Session; Show Config - Dell Force10 S4810P Reference Manual

monitor session

Create a session for monitoring traffic with port monitoring.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax monitor session session-ID
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID
Defaults none
Command Modes MONITOR SESSION (conf-mon-
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.7.1.0
Version 7.5.1.0
pre-7.7.1.0
Usage The monitor command is saved in the running configuration at Monitor Session mode level
Information
and can be restored after a chassis reload.
Example
FTOS(conf)# monitor session 60
FTOS(conf-mon-sess-60)
Related
show monitor session
Command
show running-config monitor session

show config

Display the current monitor session configuration.
C-Series, E-Series, S-Series, Z-Series
Syntax show config
Defaults none
Command Modes MONITOR SESSION (conf-mon-
Enter a session identification number. The range is 0 to 65535.
sess-session-ID )
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– displays the monitor session.
– displays the running configuration of a monitor session.
sess-session-ID )
1271