Sflow Collector - Dell Force10 S4810P Reference Manual

sflow collector

Configure a collector device to which sFlow datagrams are forwarded.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax sflow collector {ipv4-address | ipv6-address} agent-addr {ipv4-
address | ipv6-address} [number [max-datagram-size number]] |
[max-datagram-size number]
To delete a configured collector, use the no sflow collector {ipv4-address |
ipv6-address} agent-addr {ipv4-address | ipv6-address} [number
[max-datagram-size number]] | [max-datagram-size number] command.
Parameters
sflow collector
ipv4-address |
ipv6-address
agent-addr
address | ipv6-
address
number
max-datagram-
size
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.4.2.3
Version 8.4.1.1
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.7.1.0
Version 7.6.1.0
Version 6.5.1.0
Version 6.2.1.1
Usage
You can configure up to two sFlow collectors (IPv4 or IPv6). If two collectors are configured,
Information
traffic samples are sent to both.
1468
Enter the IPv4 (A.B.C.D) or IPv6 address (X:X:X:X::X) of the sFlow
collector device.
ipv4-
Enter the IPv4 (A.B.C.D) or IPv6 address (X:X:X:X::X) of the sFlow
agent in the router.
(OPTIONAL) Enter the user datagram protocol (UDP) port number. The
range is 0 to 65535. The default is 6343.
(OPTIONAL) Enter the keyword max-datagram-size followed by the
number
size number in bytes. The range is 400 to 1500. The default is 1400.
Introduced on the Z9000.
Added support for IPv6 sFlow collectors and agents on the E-series
TeraScale, C-Series, and S-Series.
Added support for IPv6 sFlow collectors and agents on the E-series
ExaScale.
Introduced on the S4810.
Introduced S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded the no form of the command to mirror the syntax used to
configure.
Introduced on the E-Series.