Rmon Collection History; Rmon Collection Statistics - Dell Force10 S4810P Reference Manual

rmon collection history

Enable the RMON MIB history group of statistics collection on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax rmon collection history {controlEntry integer} [owner name]
[buckets number] [interval seconds]
To remove a specified RMON history group of statistics collection, use the no rmon
collection history {controlEntry integer} command.
Parameters
controlEntry
integer
owner
buckets
interval
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0

rmon collection statistics

Enable RMON MIB statistics collection on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax rmon collection statistics {controlEntry integer} [owner name]
Enter the keyword controlEntry to specify the RMON group of
statistics using a value. Then enter an integer value from 1 to 65535
that identifies the RMON group of statistics. The integer value must
be a unique index in the RMON history table.
name
(OPTIONAL) Enter the keyword owner followed by the owner name
to record the owner of the RMON group of statistics.
number
(OPTIONAL) Enter the keyword buckets followed the number of
buckets for the RMON collection history group of statistics. The
bucket range is 1 to 1000. The default is 50.
seconds
(OPTIONAL) Enter the keyword interval followed the number of
seconds in each polling cycle. The range is 5 to 3600 seconds. The
default is 1800 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1379