Clear Counters Ipv6 Access-Group - Dell Force10 S4810P Reference Manual

Command Modes CONFIGURATION
Command History
Version 8.3.7.0
Version 8.4.2.0
Version 8.2.1.0
Version 7.8.1.0
Usage
For the new settings to take effect, you must save the new CAM settings to the startup-config
Information
(write-mem or copy run start), then reload the system.
The total amount of space allowed is 16 FP Blocks. System flow requires three blocks and
these cannot be reallocated.
When configuring space for IPv6 ACLs, the total number of Blocks must equal 13.
Ranges for the CAM profiles are 1-10, except for the ipv6acl profile which is 0-10. The
ipv6acl allocation must be a factor of 2 (2, 4, 6, 8, 10).
Example
FTOS#
FTOS#configure
FTOS(conf)#cam-acl-egress ?
default
l2acl
FTOS(conf)#cam-acl-egress l2acl ?
<1-4>
FTOS(conf)#cam-acl-egress l2acl 1 ?
ipv4acl
FTOS(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ?
ipv6acl
FTOS(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ipv6acl ?
<0-4>
FTOS(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ipv6acl 2

clear counters ipv6 access-group

Erase all counters maintained for the IPv6 access lists.
C-Series, E-Series, S-Series
Syntax clear counters ipv6 access-group [access-list-name]
Parameters
access-list-name
Command Modes
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Introduced on the S4810.
Introduced on the E-Series TeraScale.
Introduced on the S-Series.
Introduced on the C-Series.
Reset Egress CAM ACL entries to default setting
Set L2-ACL entries
Number of FP blocks for l2acl
Set IPV4-ACL entries
Set IPV6-ACL entries
Number of FP blocks for IPV6 (multiples of 2)
(OPTIONAL) Enter the name of a configured access-list, up to 140
characters.
• EXEC
• EXEC Privilege
Introduced on the S-Series.
Introduced on the E-Series TeraScale.
Introduced on the C-Series.
903