Dell Force10 S4810P Reference Manual page 946

Command Modes
Command History
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Usage
The forwarding table displays host route first, then displays route originated by routing protocol
Information
including static route.
The egress port section displays the egress port of the forwarding entry which is designated
as:
If a link-local IPv6 address is statically configured and dynamically learned on a C-Series
router, the dynamically-learned IPv6 address is displayed in the show ipv6 cam
linecard output, but the statically-configured IPv6 address may not be displayed. Use the
show ipv6 fib linecard or show ipv6 neighbors commands to display
statically-configured addresses of IPv6 neighbors.
Example (Fib)
FTOS#show ipv6 cam linecard 13 fib
Neighbor
-------------------------------------------------------
[ 31] 2002:44:1:1::11
Prefix
------------------------------------------------------
[ 3147] 100::/64
FTOS#
Example
FTOS#show ipv6 cam linecard 1 port-set 0
Neighbor
--------------------------------------------------------------
[ 1768] 500::1
[ 2724] 700::1
[ 3016] fe80::201:e8ff:fe5a:e59e
[ 3452] fe80::201:e8ff:fe5a:e21f
946
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series TeraScale.
• C for the Control Processor
• 1 for the Route Processor 1
• 2 for the Route Processor 2
NOTE: If a route has a mask greater than 64, no output is displayed. Similarly, if there is
more than one ECMP object with a destination route that has a mask greater than 64, if the
first 64 bits in the destination routes of the ECMP objects are the same, only one route is
installed in CAM even though multiple ECMP path entries exist.
Next-Hop
[ 0] 2002:44:1:1::11
[ 0] 2002:44:1:24::11
[ 0] 2002:44:1:23::11
[ 0] 2002:44:1:21::11
[ 0] 2002:44:1:20::11
[ 0] 2002:44:1:19::11
Mac-Addr
00:00:01:1a:1e:d5
Mac-Addr Port
-
-
-
-
-
-
Mac-Addr
00:00:00:00:00:00
00:00:00:00:00:00
00:00:00:00:00:00
00:00:00:00:00:00
Port VId
Gi 13/2 0
VId EC
Gi 0/0 0 1
Gi 0/0 0 1
Gi 0/0 0 1
Gi 0/0 0 1
Gi 0/0 0 1
Gi 0/0 0 1
Port VId
CP 100
CP 0
CP 0
CP 0