Revision; Show Config - Dell Force10 S4810P Reference Manual

revision

The revision number for the multiple spanning tree configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax revision range
To return to the default values, use the no revision command.
Parameters
range
Defaults 0
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage For two MSTP switches to be within the same MST region, the switches must share the same
Information revision number.
Related
msti
Commands
name

show config

View the current configuration for the mode. Only non-default values are shown.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show config
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
1108
Enter the revision number for the MST configuration. The range is 0 to
65535. The default is 0.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– maps the VLAN(s) to an MST instance.
– assigns the region name to the MST region.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.