Virtual Lan (Vlan) Commands - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

Command Modes

Command History

Version 8.3.11.1

Version 8.5.1.0

Version 8.3.7.0

Version 8.3.1.0

Version 7.7.1.0

Version 7.5.1.0

Version 6.5.1.0

FTOS#show mac learning-limit

FTOS#show mac learning-limit interface gig 5/84

FTOS#show mac learning-limit interface gig 5/84 vlan 2

Example (C/S-

FTOS#show mac learning-limit

FTOS#show mac learning-limit interface gig 1/0

Virtual LAN (VLAN) Commands

The following commands configure and monitor virtual LANs (VLANs). VLANs are a virtual interface and use many of the

same commands as physical interfaces.

You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP, ACLs and

SNMP are not supported on a VLAN.

On the E-Series, enter the keyword vlan followed by the VLAN ID.

The range is 1-4094.

EXEC Privilege

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Added the vlan option on the E-Series.

Introduced on the C-Series.

Added support for the violate-action and detail options.

Added support for Port Channel.