Debug Ipv6 Mld_Host - Dell Force10 S4810P Reference Manual

*
Defaults none
Command Modes EXEC Privilege
Command History
Version 7.4.1.0
Related show ipv6 pim tib
Commands

debug ipv6 mld_host

Enable the collection of debug information for MLD host transactions.
S4810
Syntax [no] debug ipv6 mld_host [int-count | interface type] [slot/
port-range]
To discontinue collection of debug information for the MLD host transactions, use the no
debug ipv6 mld_host command.
Parameters
int-count
interface type
Default Disabled
Command Modes EXEC
Command History
Version 8.3.12.0
NOTE: The :: notation specifies successive hexadecimal fields of
zero.
Enter * to clear all multicast routes.
Introduced.
– displays the IPv6 PIM tree information base.
Enter the keyword count to indicate the number of required debug
messages.
Enter the following keywords and slot/port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed by the slot/port information.
• For a 10G Ethernet interface, enter the keyword
tengigabitethernet followed by the slot/port
information.
• For a 40G interface, enter the keyword fortyGigE followed
by the slot/port information.
• For a management interface enter the keyword
managementinterface followed by the slot/port
information.
• For a port-channel interface, enter the keywords port-
channel followed by the slot/port information.
• For a VLAN interface, enter the keyword vlan followed by
the slot/port information.
Introduced on the S4810.
1127