Ip Igmp Last-Member-Query-Interval; Ip Igmp Querier-Timeout - Dell Force10 S4810P Reference Manual

ip igmp last-member-query-interval

Change the last member query interval, which is the Max Response Time inserted into Group-Specific Queries sent in
response to Leave Group messages. This interval is also the interval between Group-Specific Query messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip igmp last-member-query-interval milliseconds
To return to the default value, use the no ip igmp last-member-query-interval
command.
Parameters
milliseconds
Defaults 1000 milliseconds
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
E-Series legacy
command

ip igmp querier-timeout

Change the interval that must pass before a multicast router decides that there is no longer another multicast router that
should be the querier.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip igmp querier-timeout seconds
To return to the default value, use the no ip igmp querier-timeout command.
Parameters
seconds
Defaults 125 seconds
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Enter the number of milliseconds as the interval. The range is 100 to
65535. The default is 1000 milliseconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the number of seconds the router must wait to become the new
querier. The range is 60 to 300. The default is 125 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
743