Ip Mroute - Dell Force10 S4810P Reference Manual

ip mroute

Assign a static mroute.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip mroute destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specific static mroute, use the ip mroute destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute destination
mask command.
Parameters
destination
mask
null 0
[ protocol
process-id | tag ]
[
ip-address ]
static
ip-address
distance
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.7.0
E-Series legacy
command
1118
Enter the IP address in dotted decimal format of the destination
device.
Enter the mask in slash prefix formation ( /x ) or in dotted decimal
format.
(OPTIONAL) Enter the keyword null followed by zero (0).
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number followed by the IP address in
dotted decimal format of the reverse path forwarding (RPF)
neighbor. The range is 1 to 65535.
• Enter the OSPF process identification number followed by the
IP address in dotted decimal format of the RPF neighbor. the
range is 1 to 65535.
• Enter the IS-IS alphanumeric tag string followed by the IP
address in dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the RPF
neighbor.
ip-address
(OPTIONAL) Enter the Static IP address in dotted decimal format of
the RPF neighbor.
(OPTIONAL) Enter the IP address in dotted decimal format of the RPF
neighbor.
(OPTIONAL) Enter a number as the distance metric assigned to the
mroute. The range is 0 to 255.
Introduced on the S4810.