Redistribute Isis; Redistribute Ospf - Dell Force10 S4810P Reference Manual

redistribute isis

Redistribute routing information from an IS-IS instance.
C-Series, E-Series, S4810
Syntax redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value] [route-map map-name]
command.
Parameters
tag
level-1
level-1-2
level-2
metric
value
route-map
name
Defaults Not configured.
Command Modes ROUTER RIP
Command History
Version 8.3.7.0
pre-Version
6.2.1.1
Usage IS-IS is not supported on the S-Series systems.
Information

redistribute ospf

Redistribute routing information from an OSPF process.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax redistribute ospf process-id [match external {1 | 2} | match
internal | metric metric-value] [route-map map-name]
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS
Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-
IS Level-1 and Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS
Level-2 routes.
metric-
(OPTIONAL) Enter the keyword metric followed by a number as the
metric value. The range is 0 to 16.
map-
(OPTIONAL) Enter the keywords route-map followed by the name
of a configured route map.
Introduced on the S4810.
Introduced on the E-Series.
1369