Dot1X Server-Timeout; Dot1X Supplicant-Timeout - Dell Force10 S4810P Reference Manual

To return to the default, use the no dot1x reauth-max command.
Parameters
number
Defaults 2
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0

dot1x server-timeout

Configure the amount of time after which exchanges with the server time out.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax dot1x server-timeout seconds
To return to the default, use the no dot1x server-timeout command.
Parameters
seconds
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0

dot1x supplicant-timeout

Configure the amount of time after which exchanges with the supplicant time out.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax dot1x supplicant-timeout seconds
To return to the default, use theno dot1x supplicant-timeout command.
Parameters
seconds
Enter the permitted number of re-authentications. The range is 1 - 10.
The default is 2.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter a time-out value in seconds. The range is 1 to 300, where 300 is
implementation dependant. The default is 30.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter a time-out value in seconds. The range is 1 to 300, where 300 is
implementation dependant. The default is 30.
1439