Sflow Extended-Switch Enable - Dell Force10 S4810P Reference Manual

Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.1.1.0
Version 7.4.1.0
Usage FTOS 7.8.1.0 and later enhances the sflow implementation for real time traffic analysis on the E-
Information Series to provide extended gateway information in cases where the destination IP addresses
are learned by different routing protocols and for cases where the destination is reachable
over ECMP.
Related
sflow extended-gateway enable
Commands

sflow extended-switch enable

show sflow
sflow extended-switch enable
Enable packing information on a switch only.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax sflow extended-switch enable
To disable packing information, use the no sflow extended-switch [enable]
command.
Parameters
enable
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Usage FTOS 7.8.1.0 and later enhances the sflow implementation for real time traffic analysis on the E-
Information Series to provide extended gateway information in cases where the destination IP addresses
1472
Introduced on the E-Series ExaScale.
Introduced on the E-Series.
– enables packing information on an extended gateway.
– enables packing information on a switch.
– displays the sFlow configuration.
Enter the keyword enable to enable global extended information.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.