Show Vlan - Dell Force10 S4810P Reference Manual

show vlan

Display the current VLAN configurations on the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief
id
name
Command Modes
Command History
Version 9.1.(0.0)
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage The following describes the show vlan command shown in the Example below.
Information
Column Heading
(Column 1 — no
heading)
(OPTIONAL) Enter the keyword brief to display the following
information:
•
•
•
•
•
vlan-id
(OPTIONAL) Enter the keyword id followed by a number from 1 to
4094. Only information on the VLAN specified is displayed.
vlan-name
(OPTIONAL) Enter the keyword name followed by the name
configured for the VLAN. Only information on the VLAN named is
displayed.
• EXEC
• EXEC Privilege
Updated to support OpenFlow.
Introduced on the Z9000.
Introduced on the S4810.
Augmented to display PVLAN data for the C-Series and S-Series and
revised the output to include the Description field to display a user-
entered VLAN description.
Introduced on the S-Series and revised the output to display Native
VLAN.
Introduced on the C-Series.
Introduced on the E-Series.
Description
•
VLAN ID
VLAN name (left blank if none is configured)
Spanning Tree Group ID
MAC address aging time
IP address
asterisk symbol (*) = Default VLAN
1053