Debug Ntp - Dell Force10 S4810P Reference Manual

debug ntp

Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
To disable debugging of NTP transactions, use the no debug ntp {adjust | all |
authentication | events | loopfilter | packets | select | sync}
command.
Parameters
adjust
all
authentication
events
loopfilter
packets
select
sync
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
1560
Enter the keyword adjust to display information on NTP clock
adjustments.
Enter the keyword all to display information on all NTP transactions.
Enter the keyword authentication to display information on NTP
authentication transactions.
Enter the keyword events to display information on NTP events.
Enter the keyword loopfilter to display information on NTP local
clock frequency.
Enter the keyword packets to display information on NTP packets.
Enter the keyword select to display information on the NTP clock
selection.
Enter the keyword sync to display information on the NTP clock
synchronization.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.