Aaa Authentication Login - Dell Force10 S4810P Reference Manual

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.0
Usage
By default, the Enable password is used. If you configure aaa authentication
Information
enable default, FTOS uses the methods defined for Enable access instead.
Methods configured with the aaa authentication enable command are evaluated in
the order they are configured. If authentication fails using the primary method, FTOS employs
the second method (or third method, if necessary) automatically. For example, if the TACACS+
server is reachable, but the server key is invalid, FTOS proceeds to the next authentication
method. The TACACS+ is incorrect, but the user is still authenticated by the secondary method.
Related
enable password
Commands
login authentication
password
radius-server host
tacacs-server host

aaa authentication login

Configure AAA Authentication method lists for user access to EXEC mode (Enable log-in).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax aaa authentication login {method-list-name | default} method
[... method4]
To return to the default setting, use the no aaa authentication login {method-
list-name | default} command.
Parameters
method-list-name
default
method
1412
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– changes the password for the enable command.
– enables AAA login authentication on the terminal lines.
– creates a password.
– specifies a RADIUS server host.
– specifies a TACACS+ server host.
Enter a text string (up to 16 characters long) as the name of a user-
configured method list that can be applied to different lines.
Enter the keyword default to specify that the method list specified
is the default method for all terminal lines.
Enter one of the following methods:
• enable - use the password defined by the enable
password command in CONFIGURATION mode.
• line - use the password defined by the password
command in LINE mode.
• none - no authentication.
• radius - use the RADIUS server(s) configured with the
radius-server host command.