Command Modes
ROUTE-MAP
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Usage
The set ipv6 next-hop command is the only way to set an IPv6 Next-Hop.
Information
show config
View the current IPv6 ACL configuration.
C-Series, E-Series, S-Series
Syntax
show config
Command Modes
ACCESS-LIST
Command History
Version 8.4.2.1
Version 8.4.2.0
Version 8.2.1.0
Version 7.8.1.0
Example
FTOS(conf-ipv6-acl)#show config
!
ipv6 access-list Acl1
bytes
FTOS(conf-ipv6-acl)#
show route-map
View the current route map configurations.
C-Series, E-Series, S-Series
Syntax
show route-map
Command Modes
Command History
Version 8.4.2.1
932
Introduced on the S-Series.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series TeraScale.
Introduced on the S-Series.
Introduced on the E-Series TeraScale.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 100 count
•
EXEC
•
EXEC Privilege
Introduced on the S-Series.