state
timer
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 7.5.1.0
pre-Version
6.2.1.1
Usage
If no options are specified, debug is active on all interfaces and all VRRP groups.
Information
description
Configure a short text string describing the VRRP group.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
description text
To delete a VRRP group description, use the no description command.
Parameters
text
Defaults
Not enabled.
Command Modes
VRRP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
disable
Disable a VRRP group.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
disable
To re-enable a disabled VRRP group, use the no disable command.
1616
Enter the keyword state to enable debugging of VRRP state
changes.
Enter the keyword timer to enable debugging of the VRRP timer.
Introduced on the Z9000.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a text string up to 80 characters long.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.