Show Ip Ospf Database External - Dell Force10 S4810P Reference Manual

Related show ip ospf database
Commands

show ip ospf database external

Display information on the AS external (type 5) LSAs.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip ospf process-id database external [link-state-id] [adv-
router ip-address]
Parameters
process-id
link-state-id
adv-router
address
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the show ip ospf process-id database external
Information
command shown in the Example below.
Field
LS Age
Options
1184
– displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no Process
ID is entered, command applies only to the first OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID
value depends on the LSA type, and it can be one of the following:
•
•
•
ip-
(OPTIONAL) Enter the keywords adv-router and the ip-address to
display only the LSA information about that router.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The following
options can be found in this item:
the network's IP address for Type 3 LSAs or Type 5 LSAs
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
the default destination (0.0.0.0) for Type 5 LSAs