Show Ip Pim Tib - Dell Force10 S4810P Reference Manual

Message summary:
Data path event summary:
Memory usage:

show ip pim tib

View the PIM tree information base (TIB).
C-Series, E-Series, S-Series, S4810
Syntax show ip pim tib [group-address [source-address]]
Parameters
group-address
source-address
Command Modes
Command History
Version 8.3.12.0
Version 8.1.1.0
Version 7.8.1.0
Usage The following describes the show ip pim tib command shown in the Example below.
Information
Field
(S, G)
uptime
2582/2583 Joins sent/received
5/0 Prunes sent/received
0/0 Candidate-RP advertisements sent/received
0/0 BSR messages sent/received
0/0 State-Refresh messages sent/received
0/0 MSDP updates sent/received
0/0 Null Register messages sent/received
0/0 Register-stop messages sent/received
0 no-cache messages received
0 last-hop switchover messages received
0/0 pim-assert messages sent/received
0/0 register messages sent/received
TIB
Nexthop cache
Interface table : 992 bytes
Neighbor table
RP Mapping
(OPTIONAL) Enter the group address in dotted decimal format
(A.B.C.D).
(OPTIONAL) Enter the source address in dotted decimal format
(A.B.C.D).
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Displays the entry in the multicast PIM database.
Displays the amount of time the entry has been in the PIM route
table.
: 3768 bytes
: 0 bytes
: 528 bytes
: 0 bytes
1255