edge-port
bpduguard
shutdown-on-
violation
priority
loopguard
rootguard
Defaults
Not configured.
Command Modes
INTERFACE
Command History
Version 8.3.11.1
Version 8.4.2.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Version 6.2.1.1
Usage
The BPDU guard option prevents the port from participating in an active STP topology in
Information
case a BPDU appears on a port unintentionally, or is misconfigured, or is subject to a DOS
1400
•
100 Mb/s Ethernet interface = 200000
•
1-Gigabit Ethernet interface = 20000
•
10-Gigabit Ethernet interface = 2000
•
Port Channel interface with one 100 Mb/s Ethernet = 200000
•
Port Channel interface with one 1-Gigabit Ethernet = 20000
•
Port Channel interface with one 10-Gigabit Ethernet = 2000
•
Port Channel with two 1-Gigabit Ethernet = 18000
•
Port Channel with two 10-Gigabit Ethernet = 1800
•
Port Channel with two 100-Mbps Ethernet = 180000
Enter the keywords edge-port to configure the interface as a rapid
spanning tree edge port.
(OPTIONAL) Enter the keyword portfast to enable Portfast to
move the interface into Forwarding mode immediately after the root
fails.
Enter the keyword bpduguard to disable the port when it receives a
BPDU.
(OPTIONAL) Enter the keywords shutdown-on-violation to
hardware disable an interface when a BPDU is received and the port
is disabled.
priority
Enter keyword priority followed by a value in increments of 16 as
the priority. The range is 0 to 240. The default is 128.
(C-, S-, and E-Series TeraScale only) Enter the keyword loopguard
to enable loop guard on an RSTP port or port-channel interface.
(C-, S-, and E-Series TeraScale only) Enter the keyword rootguard
to enable root guard on an RSTP port or port-channel interface.
Introduced on the Z9000.
Added support for the optional guard keyword on the C-Series, S-
Series, and E-Series TeraScale.
Introduced on the S4810.
Introduced the hardware shutdown-on-violation options.
Introduced on the S-Series.
Introduced on the C-Series.
Added the optional bridge port data unit (BPDU) guard.
Introduced on the E-Series.