Show Ip Rpf - Dell Force10 S4810P Reference Manual

Field
Incoming interface
Outgoing interface
list:
Example
FTOS#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
(1.13.1.100, 224.10.10.1), uptime 00:04:03
(*, 224.20.20.1), uptime 00:05:12

show ip rpf

View reverse path forwarding.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip rpf
Command Modes
Command History
Version 8.3.7.0
E-Series legacy
command
Usage Static mroutes are used by network administrators to control the reach-ability of the multicast
Information sources. If a PIM-registered multicast source is reachable using static mroute as well as
unicast route, the distance of each route is examined and the route with shorter distance is the
one the PIM selects for reach-ability.
Description
Displays the reverse path forwarding (RPF) information towards the
source for (S,G) entries and the RP for (*,G) entries.
Lists the interfaces that meet one of the following:
•
•
•
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/4
Outgoing interface list:
GigabitEthernet 3/12
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/4
• EXEC
• EXEC Privilege
Introduced on the S4810.
a directly connected member of the Group
statically configured member of the Group
received a (*,G) or (S,G) Join message
1125