Password - Dell Force10 S4810P Reference Manual

Version 7.5.1.0
pre-Version
6.2.1.0
Usage If you configure the aaa authentication login default command, the login
Information authentication default command automatically is applied to all terminal lines.
Related aaa authentication login
Commands

password

Specify a password for users on terminal lines.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax password [encryption-type] password
To delete a password, use the no password password command.
Parameters
encryption-type
password
Defaults No password is configured.
Command Modes LINE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage FTOS prompts users for these passwords when the method for authentication or authorization
Information used is "line".
Related
enable password
Commands
login authentication
service password-encryption
radius-server key
the RADIUS host server.
1418
Introduced on the C-Series.
Introduced on the E-Series.
– selects the login authentication methods.
(OPTIONAL) Enter either zero (0) or 7 as the encryption type for the
password entered. The options are
• 0 is the default and means the password is not encrypted and
stored as clear text.
• 7 means that the password is encrypted and hidden.
Enter a text string up to 32 characters long. The first character of the
password must be a letter. You cannot use spaces in the password.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– sets the password for the enable command.
– configures an authentication method to log in to the switch.
– encrypts all passwords configured in FTOS.
– configures a key for all RADIUS communications between the switch and