Ip Msdp Redistribute - Dell Force10 S4810P Reference Manual

Version 6.2.1.1
Usage
The connect-source option is used to supply a source IP address for the TCP connection.
Information
When an interface is specified using the connect-source option, the primary configured
address on the interface is used.
If the total number of SA messages received from the peer is already larger than the limit when
this command is applied, those SA messages continue to be accepted. To enforce the limit in
such situation, use the clear ip msdp peer command to reset the peer.
Related
ip msdp sa-limit
Commands
clear ip msdp peer
show ip msdp

ip msdp redistribute

Filter local PIM SA entries in the SA cache. SAs which are denied by the ACL will time out and not be refreshed. Until
they time out, they continue to reside in the MSDP SA cache.
E-Series, Z-Series, S4810
Syntax ip msdp redistribute [list acl-name]
Parameters
list
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Usage
Modifications to the ACL do not have an immediate affect on the sa-cache.
Information
To apply the redistribute filter to entries already present in the SA cache, use the clear ip
msdp sa-cache local command.
1094
Introduced
– configures the MSDP SA Limit.
– clears the MSDP peer.
– displays the MSDP information.
acl-name
lEnter the name of an extended ACL that contains permitted SAs. If
you do not use this option, all local entries are blocked.
Introduced on the Z9000.
Introduced on the S4810.
Introduced