Maximum-Paths - Dell Force10 S4810P Reference Manual

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Related ip poison-reverse
Commands

maximum-paths

Set RIP to forward packets over multiple paths.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax maximum-paths number
To return to the default values, use the no maximum-paths commands.
Parameters
number
Defaults 4
Command Modes ROUTER RIP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Usage RIP supports a maximum of 16 ECMP paths.
Information
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– sets the prefix for RIP routing updates.
Enter the number of paths. The range is 1 to 16. The default is 4 paths.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1363